Classic Mini Platinum boot lining kit with luggage runners.
Kit consists of:
1x back board.
1x base board with luggage runners.
1x right hand side board.
1x left hand side board.
1x petrol tank cover board.
1x boot lid cover.
+Fixings & fastenings.
Designed to be installed in all MK3 (Onwards) Saloons & Clubmans (1969 to 2000) fitted with a 7.5 gallon fuel tank, the standard width 5.5" spare wheel (for reference, the original spare wheel tyre size is usually 145/70/12) and an open framed (the three open triangles) inner boot lid.
An installation guide for this item can be found on the link below:
This standard product range item is designed (visually) as photographed, manufactured from 6mm MDF (back board, base board, right hand side board, left hand side board) & hardboard (petrol tank cover board, boot lid cover) and trimmed in vinyl leatherette (with a 3mm foam backing), also with stainless steel luggage runners.
This standard product range item is trimmed in two colours of vinyl leatherette (please select the colours you desire from the selection boxes above). Just to let you know, the vinyl leatherette piping (that edges the central stripe panels) and decorative face stitching (that runs horizontally on the central stripe panels) is trimmed in the colour of the central stripe panels. For reference, the example photograph has been trimmed in Royal blue vinyl leatherette on the featured panels, gunmetal grey vinyl leatherette on the other panels with Royal blue vinyl leatherette piping & Royal blue stitching.
Please see the links below for colour charts of these standard trimming options:
If you cannot find a match within our standard range of trimming options (linked above), please check out our colour swatches & samples (linked below), where you will find a vast range of bespoke trimming options.
And, if you would like to change the trimming options and/or designs of this item, to match your Mini's interior, please contact us with regards to our bespoke services.