Platinum Boot Lining Kit With Runners - Single Colour

Classic Mini Platinum boot lining kit with luggage runners.
 

Kit consists of:

1x back board.
1x base board with luggage runners.
1x right hand side board.
1x left hand side board.
1x petrol tank cover board.
1x boot lid cover.
+Fixings & fastenings.
 

Installation:

Designed to be installed in all MK3 (Onwards) Saloons & Clubmans (1969 to 2000) fitted with a 7.5 gallon fuel tank, the standard width 5.5" spare wheel (for reference, the original spare wheel tyre size is usually 145/70/12) and an open framed (the three open triangles) inner boot lid.

An installation guide for this item can be found on the link below:

• Classic Mini Boot Lining Kit Installation Guide
   

Specifications:

This standard product range item is designed (visually) as photographed, manufactured from 6mm MDF (back board, base board, right hand side board, left hand side board) & hardboard (petrol tank cover board, boot lid cover) and trimmed in vinyl leatherette (with a 3mm foam backing), also with stainless steel luggage runners.
 

Trimming options:

This standard product range item is trimmed in vinyl leatherette with vinyl leatherette piping and decorative thread face stitching (please select the colours you desire from the selection boxes above). For reference, the example photograph has been trimmed in gunmetal grey vinyl leatherette with Royal blue vinyl leatherette piping & Royal blue stitching.

Please see the links below for colour charts of these standard trimming options:

• Vinyl Leatherette
• Decorative Thread

If you cannot find a match within our standard range of trimming options (linked above), please check out our colour swatches & samples (linked below), where you will find a vast range of bespoke trimming options.

• Colour Swatches & Samples

And, if you would like to change the trimming options and/or designs of this item, to match your Mini's interior, please contact us with regards to our bespoke services.