Before you install your new seat cover kit, you will need to remove the seats from your Mini.

The front seats are secured using nuts and bolts (two per seat), located underneath the seats on the legs, in each front corner. Remove the bolts from the brackets and remove the seats from your Mini.

The rear seat is secured using four screws. You will find two screws (one either side) between the cushion and the squab, accessed by pulling the cushion forwards, located on the rear bulkhead. The other two screws are located in the boot, underneath the rear parcel shelf, near the bulkhead (one either side). With all four screws removed, you can remove both the rear seat cushion and rear seat squab from your Mini.